Product information
Overview
Applications
- Safe shutdown of digital outputs: The module provides 24 V DC safe shutdown of DQ and F-DQ for safe digital output tasks.
- Safe digital signal handling: The module supports safe digital inputs and a safe digital output in the ET 200SP system.
Key Features
- Fail-safe PPM module: F-PM-E 24 V DC/8 A PPM ST for SIMATIC DP and ET 200SP.
- Digital I/O capacity: The module has 2 digital inputs and 1 digital output; the output is parameterizable.
- 24 V DC supply: Rated supply voltage is 24 V, with a permissible range of 20.4 V to 28.8 V and reverse polarity protection.
- Output switching capacity: The output has an 8 A rated current and can switch resistive loads up to 8 A or lamp loads up to 100 W.
- PROFINET engineering: PROFINET is supported from GSD version/GSD revision V2.31; STEP 7 TIA Portal is configurable/integrated from V12.
- Diagnostics and protection: The module has short-circuit, overload and open-circuit detection, diagnostic alarms, and channel and module status LEDs.
Technical Summary
| Product type designation | F-PM-E 24 V DC/8 A PPM ST |
|---|---|
| System | SIMATIC DP, ET 200SP |
| Supply voltage | 24 V DC; permissible range 20.4 V to 28.8 V |
| Digital inputs | 2 |
| Digital output | 1; parameterizable |
| Output current | 8 A rated value; 8 A max. per channel and per module |
| Resistive load switching capacity | 8 A max. |
| Lamp load switching capacity | 100 W max. |
| Usable BaseUnits | BU type C0 |
| PROFINET GSD version/GSD revision | V2.31 |
| STEP 7 TIA Portal | Configurable/integrated from V12 |
Frequently Asked Questions
What is the exact product type of Siemens 6ES7136-6PA00-0BC0?
The product type designation is F-PM-E 24 V DC/8 A PPM ST for SIMATIC DP and ET 200SP.
How many digital inputs and outputs does the module have?
It has 2 digital inputs and 1 digital output. The digital output is parameterizable.
What supply voltage does the module require?
The rated supply voltage is 24 V DC, with a permissible range of 20.4 V to 28.8 V.
What BaseUnit is usable with this module?
The usable BaseUnit is BU type C0.
What information should I provide for a quotation?
Provide the required quantity, destination and project or parts-list context for model-specific quotation support.
