Product information
Overview
Key Features
- 8 digital outputs: The module has 8 current-sourcing digital outputs with electronic short-circuit protection per channel.
- 24 V DC load voltage: Load voltages 1L+ and 2L+ have a rated value of 24 V, with a permissible range from 20.4 V to 28.8 V and reverse polarity protection.
- PROFINET interface: The device has 1 PROFINET interface with 100 Mbit/s full duplex, 2 M12, 4-pin, D-coded ports and an integrated switch.
- Output capacity: Output current for signal "1" is 2 A rated and 2 A maximum; total output current is 8 A maximum per module.
- Diagnostics and substitute values: The device supports channel diagnostics for wire break and short-circuit, diagnostic and maintenance alarms, and connectable substitute values.
- Protection and connections: The module has IP65/67/69K protection and uses M12-L with 8x M12 connections.
Technical Summary
| Product lifecycle | Active Product |
|---|---|
| Digital outputs | 8 |
| Load voltage | 24 V DC; permissible range 20.4 V to 28.8 V |
| Output current for signal "1" | 2 A rated value; 2 A permissible maximum |
| Total output current | 8 A maximum per module |
| PROFINET interfaces | 1 |
| Interface | PROFINET with 100 Mbit/s full duplex (100BASE-TX) |
| M12 ports | 2; 4-pin, D-coded |
| Shared device | Yes; maximum 2 IO Controllers |
| Firmware version | V5.1.x |
| Protection | IP65/67/69K |
| Connections | M12-L, 8x M12 |
Frequently Asked Questions
What is the exact Siemens model and output configuration?
It is Siemens 6ES7142-6BR00-0BB0, a SIMATIC ET 200eco PN device with 8 digital outputs.
What load voltage does the module require?
Load voltages 1L+ and 2L+ have a rated value of 24 V DC, with a permissible range from 20.4 V to 28.8 V.
Which network interfaces and protocols are supported?
It supports PROFINET IO, EtherNet/IP and Modbus TCP. The interface is PROFINET with 100 Mbit/s full duplex and has 2 M12, 4-pin, D-coded ports.
Does the device support shared device operation?
Yes. Shared device operation is supported with a maximum of 2 IO Controllers.
How can I request a quotation for this configuration?
Send the required quantity, destination and project or MRO list for model-specific quotation support.
