Product information
Overview
Applications
- Digital input control: Supports controlling a digital input.
- Redundant load control: Supports redundant control of a load using parallel switching of two outputs.
Key Features
- Digital output capacity: Has 8 digital outputs in groups of 4, with short-circuit protection and a 1.3 A maximum rated value for signal "1".
- Supply voltage: Supply voltage rated value is 24 V DC, with reverse polarity protection and a power supply according to NEC Class 2 required.
- PROFINET interface: Has 1 PROFINET interface with an M12 port, integrated switch, 100BASE-TX transmission, and a maximum transmission rate of 100 Mbit/s.
- Protection and diagnostics: Has IP65/67 protection, diagnostics, diagnostic alarm, readable diagnostic information, supply-voltage monitoring, wire-break and short-circuit detection, and Group error indication.
- Output capabilities: Supports controlling a digital input and redundant control of a load; parallel switching of two outputs for uprating is not supported.
- Device identification: VendorID is 002AH and DeviceID is 0306H.
Technical Summary
| Product type | SIMATIC DP ET 200eco PN spare part |
|---|---|
| Digital outputs | 8, in groups of 4 |
| Supply voltage | 24 V DC |
| Load voltage range | 20.4 V to 28.8 V DC |
| Output current | 1.3 A maximum rated value for signal "1" |
| Connections | 4xM12 |
| PROFINET interfaces | 1 |
| Protection | IP65/67 |
Frequently Asked Questions
What is Siemens 6ES7142-6BF00-0AB0?
It is a SIMATIC DP ET 200eco PN spare part with 8 digital outputs, 4xM12 connections, duplicate assignment, and IP65/67 protection.
What supply voltage does this module use?
The supply voltage rated value is 24 V DC. A power supply according to NEC Class 2 is required.
What PROFINET interfaces and protocols are supported?
It has 1 PROFINET interface with an M12 port and supports the protocol for PROFINET IO. PROFINET CBA and PROFIsafe are not supported.
Does the configuration support redundant load control?
Yes. It supports redundant control of a load using parallel switching of two outputs, but parallel switching for uprating is not supported.
