Product information
Overview
Applications
- 24 V DC power supply for ET 200AL: Used for connection to ET 200AL for 24 V DC power supply.
Key Features
- M8 power cable configuration: Flexible 4-core cable, preassembled at each end with an angled 4-pin M8 male connector and angled 4-pin M8 female connector.
- ET 200AL power connection: Suitable for connection to ET 200AL for 24 V DC power supply.
- Cable length and cores: Cable length: 5 m. Number of electrical cores: 4.
- Protection and assembly temperature: IP degree of protection: IP65/67. Ambient temperature during assembly: -30 °C to 80 °C.
- Bending performance: 2 500 000 bending cycles; cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s2.
- Angled outlet and materials: 90 degree cable outlet; gray PVC cable sheath, PP core insulation, and silicone-free construction.
Technical Summary
| Product type | Power cable |
|---|---|
| Connector configuration | Angled 4-pin M8 male / female connectors at both ends |
| Suitability for use | For connection to ET 200AL for 24 V DC power supply |
| Number of electrical cores | 4 |
| IP degree of protection | IP65/67 |
| Cable designation | 4 Li9Y 0.50 mm2 Y |
| Bending performance | 2 500 000 cycles; cable carrier compliant for 2.5 million bending cycles with a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s2 |
| Permissible bending radius, single bend, min. | 26 mm |
| Permissible bending radius, multiple bends, min. | 52 mm |
| Outgoing feeder type | 90 degree cable outlet |
| Product lifecycle | Active Product |
Frequently Asked Questions
What is the exact configuration of Siemens 6ES7194-2LH50-1AB0?
It is a flexible 4-core, 5 m power cable with an angled 4-pin M8 male connector and an angled 4-pin M8 female connector preassembled at each end.
What protection does this M8 power cable provide?
It has IP65/67 protection.
What bending conditions apply to the cable?
It supports 2 500 000 bending cycles; cable carrier compliance applies at a bending radius of 52 mm, a speed of 3 m/s and an acceleration of 10 m/s2.
What information should be included for a quotation request?
Provide the required quantity, destination, and any project-list context for verification.
