Product information
Overview
Key Features
- Digital output capacity: 4 source outputs (PNP, current-sourcing) with 2 A rated output current per signal "1".
- Load voltage: 24 V rated DC load voltage from the power module, with reverse polarity protection.
- Output protection: Short-circuit protection is provided; potential separation exists between the digital outputs and backplane bus.
- Switching performance: Switching frequency is up to 1 000 Hz with resistive load, 2 Hz with inductive load at 0.5 H, and 10 Hz on lamp load.
- Mechanical configuration: 15 mm width, 81 mm height, 52 mm depth, and approximately 40 g weight.
- Packing quantity: 5 electronic modules per packing unit.
Technical Summary
| Product type | SIMATIC DP electronic module for ET 200S |
|---|---|
| Digital outputs | 4 source outputs (PNP, current-sourcing) |
| Load voltage | 24 V DC; From power module |
| Rated output current | 2 A; for signal "1" |
| Output current permissible range | 7 mA to 2.4 A; for signal "1" |
| Short-circuit protection | Yes |
| Switching frequency | 1 000 Hz max. with resistive load; 2 Hz max. with inductive load at 0.5 H; 10 Hz max. on lamp load |
| Output delay | 50 μs max.; 45 μs typ. from "0" to "1"; 120 μs max.; 90 μs typ. from "1" to "0" |
| Address space | 1 byte max. per module; 4 bit with packing |
| Packing quantity | 5 units per packing unit |
Frequently Asked Questions
What is the exact Siemens model and configuration?
It is Siemens 6ES7132-4BD32-0AA0, a SIMATIC DP electronic module for ET 200S with 4 standard 24 V DC/2 A digital outputs and 15 mm width.
What load voltage does the module use?
The rated load voltage is 24 V DC from the power module. Reverse polarity protection is provided.
What switching frequencies are supported?
The maximum switching frequency is 1 000 Hz with resistive load, 2 Hz with inductive load at 0.5 H, and 10 Hz on lamp load.
How can I request a quotation for this module?
Send the required quantity, destination, and project-list context for an MRO or project quotation.
