Product information
Overview
Applications
- SCADA system connection: Connects to a SCADA system by IEC 60870-5 104, DNP3, Telecontrol Server Basic and ST7-capable control center.
- Telecontrol station communication: Supports use as a substation and communication through permanent or demand-oriented connections.
Key Features
- Telecontrol communication: Supports DNP3, IEC 60870-5 and SINAUT ST7 protocols, with connections to Telecontrol Server Basic and ST7-capable control centers.
- Industrial Ethernet interface: Provides 1 Industrial Ethernet interface with 2 electrical connections and a transfer rate of 10 … 100 Mbit/s via an ET 200SP bus adapter.
- Open IE communication: Supports TCP/IP, ISO-on-TCP and UDP communication, IP broadcast/multicast, SNMP v1, SNMP v3, DHCP and secure email.
- Connection capacity: Supports up to 32 connections for open communication by means of T blocks, with a maximum data volume of 65536 byte per ISO-on-TCP connection.
- Supply and mounting: Uses 24 V DC supply with a 19.2 … 28.8 V range, 6 W power loss and 35 mm DIN-rail mounting.
- Environmental protection: Has IP20 protection and supports -30 … +50 °C during operation for vertical installation or -30 … +60 °C for horizontally arranged busbars.
Technical Summary
| Product type | CP 1542SP-1 IRC |
|---|---|
| Industrial Ethernet transfer rate | 10 … 100 Mbit/s |
| Industrial Ethernet interfaces | 1 |
| Electrical connections | 2 |
| Supply voltage | 24 V DC; 19.2 … 28.8 V |
| Power loss | 6 W |
| Open communication connections | 32 maximum by means of T blocks |
| ISO-on-TCP data volume | 65536 byte maximum per connection |
| S7 communication connections | 16 maximum |
| Data points per device | 1500 maximum |
| Mounting | 35 mm DIN-rail mounting |
Frequently Asked Questions
What is the exact product type of 6GK7542-6VX00-0XE0?
It is a CP 1542SP-1 IRC communications processor with the SIMATIC NET product brand name.
Which protocols does this communications processor support?
It supports DNP3, IEC 60870-5, SINAUT ST7, NTP, SNMP v1, SNMP v3, DCP and LLDP.
What supply and mounting details apply?
Supply is 24 V DC, with a 19.2 … 28.8 V range and 6 W power loss. Mounting is on a 35 mm DIN rail.
Is an adapter required for the Ethernet connection?
Yes. An ET 200SP bus adapter is required; the connection type is via ET 200SP bus adapter (RJ45, FC, SCRJ), integrated switch.