Product information
Overview
Key Features
- Motor ratings: PN=2kW, rated speed 3,000 rpm, rated torque 6.5 Nm (100 K), and efficiency 92.0 %.
- Dynamic performance: Maximum torque: 65.0 Nm; maximum current: 84.0 A; maximum permissible speed: 6,000 rpm mechanically and with the inverter.
- Feedback system: Encoder AM24DQI: absolute Encoder 24 bits with resolution 16777216 and encoder-internal 2048 S/R, plus 12 bits multi-turn with a traversing range of 4096 revolutions.
- Mounting and cooling: IM B5 (IM V1, IM V3) design with natural cooling and a rotatable flange 1 power connector.
- Holding brake: Permanent-magnet brake with 22.0 Nm holding torque, DC 24 V ± 10 % power supply voltage, 0.9 A coil current, 200 ms opening time, and 60 ms closing time.
- Protection and shaft: IP64 degree of protection; the shaft end has a Feather key and tolerance N.
Technical Summary
| Product type | Permanent-magnet synchronous motor, High Dynamic |
|---|---|
| Rated power | PN=2kW |
| Rated supply voltage | UDC=600V |
| Rated speed | 3,000 rpm (100 K) |
| Rated torque | 6.5 Nm (100 K) |
| Mounting | IM B5 (IM V1, IM V3) |
| Cooling | Natural cooling |
| Encoder | AM24DQI absolute Encoder, 24 bits + 12 bits multi-turn, DRIVE-CLiQ interface |
| Power connector | Flange 1, rotatable |
| Holding brake | Permanent-magnet brake, 22.0 Nm holding torque |
| Degree of protection | IP64 |
| Lifecycle | Active Product |
Frequently Asked Questions
What is the exact motor type and order number?
It is the Siemens SIMOTICS S 1FK7085-4CF71-1CB0 permanent-magnet synchronous motor, High Dynamic.
Which feedback system and interface does it have?
It has an AM24DQI absolute Encoder with 24 bits plus 12 bits multi-turn and a DRIVE-CLiQ interface.
What mounting and connector configuration does it use?
It uses IM B5 (IM V1, IM V3) mounting with a rotatable flange 1 power connector and rotatable signal and power connectors.
Does the configuration include a holding brake and shaft key?
It has a permanent-magnet holding brake and a shaft end with a Feather key; the holding brake has 22.0 Nm holding torque.
What information should be included for a quotation request?
Provide the required quantity, destination, requested date, and project or model list for quotation review.
