Product information
Overview
Key Features
- 4 analog outputs: Provides 4 analog outputs with selectable voltage ranges from 0 to 10 V, 1 V to 5 V, and -10 V to +10 V, plus current ranges from 0 to 20 mA, -20 mA to +20 mA, and 4 mA to 20 mA.
- 24 V load voltage: Rated load voltage is 24 V DC, with a permissible range from 20.4 V to 28.8 V DC.
- Output performance: Maximum cycle time for all channels is 1 ms, with maximum resolution of 16 bit including sign.
- M12 and actuator connections: Has 4 M12 connections and supports two-wire and four-wire connections for voltage and current outputs.
- Diagnostics and protection: Supports channel-by-channel parameterizable substitute values, parameterizable diagnostic alarms, wire-break and short-circuit diagnostics, and green or green/red LED indications.
- IP65/67 protection: The IP degree of protection is IP65/67. Shielded cable length is limited to 30 m maximum.
Technical Summary
| Product type | AQ 4xU/I |
|---|---|
| Analog outputs | 4 |
| Rated load voltage | 24 V DC |
| Permissible load voltage | 20.4 V to 28.8 V DC |
| Voltage output ranges | 0 to 10 V; 1 V to 5 V; -10 V to +10 V |
| Current output ranges | 0 to 20 mA; -20 mA to +20 mA; 4 mA to 20 mA |
| Maximum resolution | 16 bit including sign |
| Cycle time, maximum | 1 ms for all channels |
| Actuator connections | Two-wire and four-wire connections for voltage and current outputs |
| Firmware version | V2.0.x |
| Protection | IP65/67 |
| Order number | 6ES7145-5ND00-0BA0 |
Frequently Asked Questions
What is the output configuration of Siemens 6ES7145-5ND00-0BA0?
It has 4 analog outputs with selectable voltage and current output ranges.
What load voltage does this module require?
The rated load voltage is 24 V DC, with a permissible range from 20.4 V to 28.8 V DC.
Which actuator connections are supported?
It supports two-wire and four-wire connections for voltage outputs and current outputs.
What protection and cable limit apply?
The module has IP65/67 protection, and the shielded cable length is 30 m maximum.
What information should I provide for an MRO or project quotation?
Provide the required quantity, destination, requested date, and project list context for verification.
