Product information
Overview
Key Features
- Potential distribution: Provides 1 P1 potential and 17 P2 potentials; P1, P2 and AUX rails are bridged to the left BaseUnit.
- Push-In terminals: Has Push-In terminals with conductor cross-sections from 0.14 mm2 to 2.5 mm2.
- Voltage and current capacity: Rated value is 48 V max. for the P1 and P2 bus and process terminals; current carrying capacity is 10 A max. for both.
- Potential separation: Potential separation is provided between the backplane bus and supply voltage; isolation is tested with 3 250 V DC.
- Installation and dimensions: Supports horizontal installation from -30 °C to 60 °C and vertical installation from -30 °C to 50 °C. Dimensions are 15 mm × 117 mm × 35 mm.
- Supply-line protection: External protection for power supply lines requires a 10 A miniature circuit breaker with type B or C tripping characteristic for the respective rated supply voltage.
Technical Summary
| Product type | PotDis BU type P2, dark version |
|---|---|
| Lifecycle | Active Product |
| Potential configuration | 1 x P1-potential, 17 x P2-potential |
| Terminals | Push-In terminal; 0.14 mm2 to 2.5 mm2 conductor cross-section |
| Rated value, P1 and P2 bus | 48 V; max. |
| Rated value, process terminals | 48 V; max. |
| Current carrying capacity | 10 A max. for P1 and P2 bus and process terminals |
| Potential group continuation | Potential group continued from the left: Yes; new potential group: No |
| Operating ambient temperature | Horizontal installation: -30 °C to 60 °C; vertical installation: -30 °C to 50 °C |
| Maximum installation altitude | 5 000 m; restrictions for installation altitudes > 2 000 m, see manual |
Frequently Asked Questions
What is the exact product type of Siemens 6ES7193-6UP00-0BP2?
It is a SIMATIC ET 200SP PotDis BU type P2, dark version, potential distributor module.
How are the potentials configured?
The module has 1 P1 potential and 17 P2 potentials, with P1, P2 and AUX rails bridged to the left BaseUnit.
What terminals and conductor sizes does it use?
It uses Push-In terminals for conductors from 0.14 mm2 to 2.5 mm2.
What are the voltage and current limits?
The rated value is 48 V max. and the current carrying capacity is 10 A max. for the P1 and P2 bus and process terminals.
What should I include when requesting a quotation?
Provide the required quantity and destination so the exact configuration can be reviewed for an MRO or project quotation.
