Product information
Overview
Applications
- Voltage measurement: Supports voltage measurement in the 0 to +10 V range.
- Resistance measurement: Supports resistance measurement from 0 to 10000 ohms.
- Pt100 measurement: Supports Pt100 measurement in the climatic range.
Key Features
- Analog I/O capacity: Has 4 analog inputs and 2 analog outputs; the inputs support voltage, Pt100 and resistance measurement.
- Signal ranges: Supports 0 to +10 V input and output ranges, Pt100 in the climatic range, and 0 to 10000 ohms resistance measurement.
- Resolution and timing: Provides 12 bit resolution with overrange; conversion time is 500 μs per channel and cycle time is 85 ms maximum for all channels.
- Supply and protection: Uses 24 V DC rated load voltage with reverse polarity protection. Voltage outputs have short-circuit protection and a 30 mA maximum short-circuit current.
- Isolation and connection: Analog inputs are isolated from the backplane bus; the module requires a 20-pin front connector and supports shielded cables up to 100 m.
- Mechanical data and lifecycle: Measures 40 mm wide, 125 mm high and 117 mm deep, weighs approximately 200 g, and has product lifecycle status Product cancellation.
Technical Summary
| Product type | SIMATIC S7-300 analog module, SM 334 |
|---|---|
| Analog inputs | 4 |
| Analog outputs | 2 |
| Input and output range | 0 to +10 V |
| Resistance measurement range | 0 to 10000 ohms |
| Supply voltage | 24 V DC rated load voltage L+ |
| Resolution | 12 bit with overrange |
| Conversion time | 500 μs per channel |
| Cycle time | 85 ms maximum, all channels |
| Front connector | 20-pin |
Frequently Asked Questions
What is the exact product and I/O configuration?
The exact product is Siemens 6ES7334-0KE00-0AB0, a SIMATIC S7-300 SM 334 analog module with 4 analog inputs and 2 analog outputs.
Which measurement ranges does the module support?
It supports 0 to +10 V voltage measurement, Pt100 measurement only in the climatic range, and 0 to 10000 ohms resistance measurement.
What connector is required?
A 20-pin front connector is required.
Is the module supplied with a front connector?
The source specifies that a 20-pin front connector is required; it does not state that the connector is included.
Can you quote this module for my project?
Send the required quantity, destination and project-list context for a model-specific quotation.
