Product information
Overview
Applications
- Deterministic data exchange: Enables deterministic data exchange between max. 1 controller per side.
Key Features
- Multi-fieldbus coupling: Supports PN IO and EtherNet/IP for deterministic data exchange between max. 1 controller per side.
- Supply and protection: Rated supply voltage: 24 V DC; permissible range: 19.2 V to 28.8 V DC. Reverse polarity protection: Yes.
- PROFINET interfaces: 2 PROFINET interfaces and 2 ports via BusAdapter, with an integrated switch. Compatible BusAdapters: BA 2x RJ45, BA 2x FC, BA 2x M12.
- Ethernet communication: PROFINET with 100 Mbit/s full duplex (100BASE-TX), plus autonegotiation and autocrossing. EtherNet/IP is supported via interface X1.
- Mounting and configuration: Mounting: mounting rail 7.5 mm and 15 mm. Configurable via GSD file; STEP 7 TIA Portal configurable/integrated from V16 or higher via HSP of PN/PN coupler V4.2 or higher in compatibility mode.
- Configuration exclusion: The coupler is supplied without BusAdapter. Optical interface: No.
Technical Summary
| Product type | PN/MF coupler |
|---|---|
| Supply voltage | 24 V DC; permissible range: 19.2 V to 28.8 V DC |
| PROFINET interfaces | 2; one PROFINET interface per line side |
| Ports | 2; via BusAdapter |
| Supported protocols | PROFINET IO Device, EtherNet/IP via interface X1 |
| Maximum address space per module | 254 byte; max. 254 bytes of input data and 253 bytes of output data |
| Mounting | Mounting rail 7.5 mm and 15 mm |
| Firmware version | V5.0.1 |
| Firmware update possible | Yes |
| BusAdapter | Supplied without BusAdapter; compatible: BA 2x RJ45, BA 2x FC, BA 2x M12 |
| Product lifecycle | Active Product |
Frequently Asked Questions
What is the exact product type of 6ES7158-3MU10-0XA0?
It is a PN/MF coupler.
Which supply voltage does the coupler use?
Its rated supply voltage is 24 V DC, with a permissible range from 19.2 V to 28.8 V DC.
Which network protocols are supported?
It supports PROFINET IO Device and EtherNet/IP via interface X1.
Is the BusAdapter included in this configuration?
It is supplied without BusAdapter. Compatible BusAdapters are BA 2x RJ45, BA 2x FC and BA 2x M12.
What details should be included in a quotation request?
Please provide the required quantity, destination and project or requested-date context for verification.
