Product information
Overview
Key Features
- Analog capacity: 8 analog inputs: 6 fixed and 2 parameterizable; 2 parameterizable analog outputs.
- Resolution and diagnostics: 16-bit resolution with channel diagnostics for wire break and short-circuit.
- Supported networks: PROFINET IO, EtherNet/IP and Modbus TCP are supported; PROFINET system redundancy S2 and MRP are available.
- PROFINET interface: 1 PROFINET interface with 2 M12, 4-pin, D-coded ports, integrated switch and transmission rate up to 100 Mbit/s.
- Supply and protection: Rated load voltage: 24 V DC; permissible range: 20.4 V to 28.8 V. Protection rating: IP65/67/69K.
- Configuration and diagnostics: STEP 7 V18 or higher with HSP 0391, firmware V5.1.x, I&M0 to I&M3 and parameterizable diagnostic, maintenance and limit value alarms.
Technical Summary
| Product lifecycle | Active Product |
|---|---|
| Analog inputs | 8; 6 AI fixed, 2 AIQ can be parameterized |
| Analog outputs | 2; AIQ can be parameterized |
| Resolution | 16 bit |
| Load voltage 1L+ | 24 V DC rated; permissible range 20.4 V to 28.8 V |
| PROFINET interfaces | 1 |
| Network protocols | PROFINET IO, EtherNet/IP, Modbus TCP |
| M12 ports | 2; 4-pin, D-coded |
| Firmware version | V5.1.x |
| Address space per module | 48 byte; 44 bytes for inputs and 4 bytes for outputs |
| Connections per device | 12 |
| IP degree of protection | IP65/67/69K |
Frequently Asked Questions
What is the exact model and product type?
It is Siemens 6ES7146-6HF00-0BB0, SIMATIC ET 200eco PN with 8 analog inputs and 2 analog outputs.
Which communication protocols are supported?
It supports PROFINET IO, EtherNet/IP and Modbus TCP. PROFIsafe, PROFINET system redundancy R1 and DLR are not supported.
What supply voltage and protection rating does it have?
The rated load voltage is 24 V DC, with a permissible range of 20.4 V to 28.8 V. The protection rating is IP65/67/69K.
Which engineering software version is supported?
STEP 7 V18 or higher with HSP 0391 is required for configurable/integrated engineering; MFCT V1.5 or higher is supported.
What information should be included in a quotation request?
Provide the required quantity, destination and project-list context for model-specific verification and quotation.
