Product information
Overview
Key Features
- Motor ratings: Rated power: 2 kW; rated speed: 3,000 rpm (100 K); rated torque: 6.5 Nm (100 K).
- Electrical characteristics: UDC: 600 V; rated current: 7.0 A; maximum current: 84.0 A.
- Feedback and interface: Resolver 14 bits with resolution 16384 and internal 2-pole design; DRIVE-CLiQ interface; rotatable signal and power connectors.
- Mounting and cooling: Natural cooling; IM B5 (IM V1, IM V3) design; M40 connector size.
- Brake and shaft: Permanent-magnet holding brake with 22.0 Nm holding torque and DC 24 V ± 10 % supply; shaft with fitted feather key.
- Protection and lifecycle: Degree of protection: IP65. Lifecycle status: Active Product.
Technical Summary
| Product | Siemens SIMOTICS S 1FK7085-4CF71-1PB1 |
|---|---|
| Motor type | Permanent-magnet synchronous motor; High Dynamic |
| Rated power | 2 kW |
| Rated speed | 3,000 rpm (100 K) |
| Rated torque | 6.5 Nm (100 K) |
| Supply designation | UDC=600 V |
| Feedback | Resolver 14 bits, resolution 16384, internal 2-pole; DRIVE-CLiQ interface |
| Mounting | IM B5 (IM V1, IM V3) |
| Cooling | Natural cooling |
| Holding brake | Permanent-magnet brake; holding torque 22.0 Nm; DC 24 V ± 10 % |
| Protection | IP65 |
Frequently Asked Questions
What are the rated power, speed, and torque of the 1FK7085-4CF71-1PB1?
Rated power is 2 kW, rated speed is 3,000 rpm (100 K), and rated torque is 6.5 Nm (100 K).
Which feedback system and interface does this motor have?
It has a Resolver 14 bits system with resolution 16384, an internal 2-pole design, and a DRIVE-CLiQ interface.
Which mounting and connector configuration does it use?
The motor uses IM B5 (IM V1, IM V3) mounting, an M40 connector size, and rotatable signal and power connectors.
Does the motor include a holding brake and IP65 protection?
It has a permanent-magnet holding brake with 22.0 Nm holding torque and IP65 degree of protection.
What information should I provide for a quotation?
Provide the required quantity, destination, requested date, and project or MRO requirements for quotation review.
