Product information
Overview
Key Features
- Digital output capacity: 16 digital outputs with source output (PNP, current-sourcing) and parameterizable output behavior.
- Output current and voltage: Rated output voltage: 24 V DC. Output current for signal "1": 0.5 A rated and 0.5 A permissible maximum.
- Load switching: Maximum switching capacity: 0.5 A with resistive or inductive load and 5 W with lamp load.
- Protection and diagnostics: Electronic short-circuit protection, open-circuit detection, substitute values, and diagnostics for supply voltage, wire break, short-circuit to ground, and short-circuit to L+.
- BaseUnit and connections: Fits BU type A0. Two-wire and 3-wire connections use BU type A0 with AUX terminals or a potential distributor module.
Technical Summary
| Product type | DQ 16x24VDC/0.5 ST |
|---|---|
| Digital outputs | 16 |
| Output type | Source output (PNP, current-sourcing) |
| Rated output voltage | 24 V DC |
| Output current for signal "1" | 0.5 A |
| Supply voltage permissible range | 19.2 V to 28.8 V DC |
| BaseUnit | BU type A0 |
| Firmware version | V0.0 |
Frequently Asked Questions
What is the exact product type of Siemens 6ES7132-6BH01-0BA0?
It is a SIMATIC ET 200SP digital output module, product type DQ 16x24VDC/0.5 ST.
How many outputs and what output current does the module provide?
It has 16 source outputs. Output current for signal "1" is 0.5 A rated and 0.5 A permissible maximum.
Which BaseUnit is used for this module?
It fits BU type A0. Two-wire and 3-wire connections use BU type A0 with AUX terminals or a potential distributor module.
Which diagnostics are available?
Diagnostics are available for supply voltage, wire break, short-circuit to ground, and short-circuit to L+. Electronic short-circuit protection and substitute values are also available.
