Product information
Overview
Key Features
- PROFIBUS DP interface: Interfaces/bus type: PROFIBUS DP; PROFIBUS protocol: Yes.
- Addressing volume: Inputs: 244 byte; Outputs: 244 byte.
- Supply voltage: Rated supply voltage: 24 V DC; load voltage 2L+: 24 V DC.
- RS 485 transmission: Maximum transmission rate: 12 Mbit/s; automatic detection of transmission rate: Yes.
- Diagnostics and interrupts: Diagnostic alarm and hardware interrupt: Yes; both are parameterizable. LEDs indicate load voltage monitoring, bus fault BF, group error SF, and 24 V voltage supply ON.
- Installation and protection: Hot swapping of modules: possible. Reverse polarity protection is provided for the supply and load voltage against destruction; short-circuit protection is provided over exchangeable fuses.
Technical Summary
| Product type | IM 154-1 DP |
|---|---|
| Vendor identification | 8118H |
| Interfaces/bus type | PROFIBUS DP |
| Rated supply voltage (DC) | 24 V |
| Load voltage 2L+ (DC) | 24 V |
| Addressing volume, inputs | 244 byte |
| Addressing volume, outputs | 244 byte |
| Maximum RS 485 transmission rate | 12 Mbit/s |
| Power loss, typ. | 5 W |
| Ambient temperature during operation | -25 °C to 55 °C |
Frequently Asked Questions
What is the exact product type of Siemens 6ES7154-1AA01-0AB0?
It has the product type designation IM 154-1 DP and is a PROFIBUS DP interface module for ET 200 PRO.
What supply voltage does the module use?
The rated supply voltage is 24 V DC, and the rated load voltage 2L+ is 24 V DC.
What interfaces and transmission rate are supported?
It has a PROFIBUS DP interface and RS 485 transmission with a maximum rate of 12 Mbit/s. Automatic transmission-rate detection is available.
Is the connection module included?
It is without the connection module; the connection module in 6ES7194-4A.00-0AA0 must be ordered separately.
What information should I provide for a quotation?
Provide the required quantity, destination, and project-list context for verification and quotation.
