Product information
Overview
Key Features
- IO-Link and DIQ capacity: Has 8 IO-Link ports, 8 digital inputs and 8 digital outputs, with the DIQ channels parameterizable.
- Industrial Ethernet interfaces: Provides PROFINET with 100 Mbit/s full duplex, an integrated switch and 2 M12, 4-pin, D-coded ports.
- Multi-protocol communication: Supports PROFINET IO, EtherNet/IP and Modbus TCP, plus PROFINET system redundancy (S2) and MRP.
- 24 V DC supply: Load voltage 1L+ and 2L+ have a rated value of 24 V DC and a permissible range of 20.4 V to 28.8 V.
- Output and diagnostics: Digital outputs provide 0.5 A rated current per signal "1", electronic short-circuit protection per channel and configurable diagnostic information.
- Protection and configuration: Has IP65/67/69K protection, I&M0 to I&M3 data, prioritized startup, shared device with up to 2 controllers and firmware version V5.1.x.
Technical Summary
| Product identity | SIMATIC ET 200eco PN, CM 8x IO-Link + DIQ 8x 24 V DC/0.5 A, M12-L, 8x M12 |
|---|---|
| IO-Link ports | 8; all 8 simultaneously controllable |
| Digital channels | 8 digital inputs and 8 digital outputs; parameterizable as DIQ |
| Network interfaces | 1 PROFINET interface; 100 Mbit/s full duplex; 2 M12, 4-pin, D-coded ports |
| Supported protocols | PROFINET IO, EtherNet/IP and Modbus TCP |
| Load voltage | 24 V DC rated; 20.4 V to 28.8 V permissible range for 1L+ and 2L+ |
| Output current | 0.5 A rated value for signal "1"; 4 A maximum per module |
| Cycle and update time | IO-Link cycle time, min. 2 ms; EtherNet/IP RPI 2 ms; I/O request interval 2 ms |
| Engineering | STEP 7 V17 or higher with HSP 0378; GSDML V2.4.x; MFCT V1.4.1 or higher |
| Protection | IP65/67/69K |
| Firmware | V5.1.x; FW update possible |
| Product lifecycle | Active Product |
Frequently Asked Questions
What is the exact Siemens model and module type?
It is Siemens 6ES7148-6JJ00-0BB0, a SIMATIC ET 200eco PN module with 8 IO-Link ports and DIQ 8x 24 V DC/0.5 A.
How many IO-Link ports and digital channels does it have?
It has 8 IO-Link ports and 8 digital inputs plus 8 digital outputs, with the digital channels parameterizable as DIQ.
Which network protocols and interfaces are supported?
It supports PROFINET IO, EtherNet/IP and Modbus TCP. The interface section includes 2 M12, 4-pin, D-coded ports and an integrated switch.
What supply voltage is supported?
Load voltage 1L+ and 2L+ have a rated value of 24 V DC, with a permissible range of 20.4 V to 28.8 V.
What information should I provide for a quotation?
Provide the required quantity, destination and project-list context for model-specific quotation support.
