Product information
Overview
Applications
- Analog voltage and current measurement: The module supports voltage measurement and current measurement as a 4-wire transducer; current measurement as a 2-wire transducer is not supported.
Key Features
- Analog I/O capacity: 4 non-isolated analog inputs and 2 analog outputs.
- Supported signal ranges: Inputs support 0 to +10 V and 0 to 20 mA; outputs support 0 to 10 V and 0 to 20 mA.
- Rated supply: Load voltage L+ rated value (DC): 24 V.
- Conversion performance: Cycle time for all channels, max.: 5 ms; conversion time per channel: 500 μs.
- Connection and mounting dimensions: Required front connector: 20-pin. Dimensions: 40 mm width, 125 mm height, and 117 mm depth.
- Product lifecycle: Product cancellation.
Technical Summary
| Product type | SIMATIC S7-300 analog module SM 334 |
|---|---|
| Analog inputs | 4 |
| Analog outputs | 2 |
| Rated load voltage L+ | 24 V DC |
| Input ranges | 0 to +10 V; 0 to 20 mA |
| Output ranges | 0 to 10 V; 0 to 20 mA |
| Cycle time | 5 ms, max. (all channels) |
| Front connector | 20-pin |
| Input isolation | No potential separation between channels and backplane bus |
| Output protection | Voltage output short-circuit protection: Yes |
| Product lifecycle | Product cancellation |
Frequently Asked Questions
What is the exact Siemens model and I/O configuration?
It is Siemens 6ES7334-0CE01-0AA0, a SIMATIC S7-300 analog module SM 334 with 4 analog inputs and 2 analog outputs.
Which signal ranges does the module support?
The inputs support 0 to +10 V and 0 to 20 mA. The outputs support 0 to 10 V and 0 to 20 mA.
Which connector is required?
The required front connector is 20-pin.
What supply voltage is specified?
The load voltage L+ rated value (DC) is 24 V.
What information should be included for a quotation request?
Send the required quantity, destination, and any project-list context for quotation review.
