Product information
Overview
Applications
- Conductive electric-vehicle charging: Controls conductive charging of electric vehicles in charge operating mode 4 according to DIN SPEC 70121 and ISO15118.
Key Features
- Conductive EV charging control: Technology module for conductive charging of electric vehicles according to DIN 70121, DIN SPEC 70121 and ISO15118 charge operating mode 4.
- Control Pilot interface: 1x Control Pilot including Powerline Green Phy and 1x Plug Present / Proximity Pilot according to IEC 61851.
- Digital outputs: 2 transistor digital outputs: 1x digital out TRIP function as open collector and 1x digital out (DQ P) as open collector; current-sinking and short-circuit proof.
- 24 V DC supply: Rated supply voltage is 24 V DC with a permissible range of 19.2 V to 28.8 V and reverse polarity protection against destruction.
- ET 200SP installation: Mounting type is standard rail; horizontal and vertical mounting positions are supported. Usable BaseUnits are BU type B0, B1.
- Diagnostics and communication: Supports backplane bus communication, Mode 4 vehicle communication according to IEC 61851, diagnostic alarm, green PWR and channel-status LEDs, and green/red DIAG LED.
Technical Summary
| Product type | ECC PL ST |
|---|---|
| Number of channels | 1; Acc. to IEC 61851-1 Mode 4 and DIN SPEC 70121 |
| Supply voltage | 24 V DC; permissible range 19.2 V to 28.8 V |
| Digital outputs | 2; 1x digital out TRIP function as open collector, 1x digital out (DQ P) as open collector |
| Control Pilot | 1x Control Pilot including Powerline Green Phy |
| Plug Present / Proximity Pilot | 1x analog input according to IEC 61851 |
| Mounting | Standard rail; horizontal, vertical |
| Firmware version | V1.1.13 |
| Engineering | STEP 7 V16 or higher |
| Protection | IP20 |
Frequently Asked Questions
What is the exact product type of Siemens 6FE1242-6TM20-0BB1?
The product type designation is ECC PL ST, a SIMATIC ET 200SP TM ECC PL ST load controller.
What supply voltage does the 6FE1242-6TM20-0BB1 use?
It uses 24 V DC supply voltage, with a permissible range of 19.2 V to 28.8 V.
Which charging signals and outputs are available?
It has 1x Control Pilot including Powerline Green Phy, 1x Plug Present / Proximity Pilot, and 2 transistor digital outputs with open-collector functions.
How is the module mounted?
It mounts on a standard rail in a horizontal or vertical mounting position.
Can you quote this exact module for a project?
Send the required quantity, destination, requested date and project list for a model-specific quotation.
