Product information
Overview
Applications
- Connecting ET-CONNECTION nodes: Used for connecting ET-CONNECTION nodes, e.g. SIMATIC ET 200AL, in degree of protection IP65/67.
Key Features
- Bus cable configuration: Flexible 4-core cable, preassembled at one end with 1x M8 plug, 4-pin, and shielded construction.
- Cable length and designation: Cable length: 10 m. Cable designation: 2Y(ST)CY 1x4x0.5/1.0-100-GN.
- ET-CONNECTION suitability: For connecting ET-CONNECTION nodes, e.g. SIMATIC ET 200AL, in degree of protection IP65/67.
- Bending performance: 1 000 000 bending cycles; cable carrier compliant for 1 million bending cycles with a bending radius of 100 mm, a speed of 4 m/s and an acceleration of 4 m/s2.
- Connection and materials: 180° cable outlet, PVC cable sheath, PE core insulation, silicone-free, and not halogen-free.
Technical Summary
| Product type | Bus cable |
|---|---|
| Connector configuration | Preassembled at one end with 1x M8 plug, 4-pin |
| Electrical cores | 4 |
| Protection suitability | IP65/67 |
| Cable designation | 2Y(ST)CY 1x4x0.5/1.0-100-GN |
| Minimum bending radius, single bend | 20 mm |
| Minimum bending radius, multiple bends | 40 mm |
| Continuous bending radius | 100 mm |
| Assembly ambient temperature | -30 °C to 80 °C |
| Storage/transport ambient temperature | -40 °C to 80 °C |
Frequently Asked Questions
What is the exact product type of Siemens 6ES7194-2LN10-0AC0?
It is a bus cable for ET connection M8, pre-assembled at one end with 1x M8 connector, 4-pole, shielded, with a cable length of 10 m.
Which nodes can this cable connect?
It is for connecting ET-CONNECTION nodes, e.g. SIMATIC ET 200AL, in degree of protection IP65/67.
What bending restrictions apply?
The minimum permissible bending radius is 20 mm for a single bend and 40 mm for multiple bends. Continuous bending uses a 100 mm radius.
What should I provide for a quotation request?
Provide the required quantity, destination, and any relevant MRO or project-list context.
